Pre-wired for quick installation. Just add alarms, lights etc. or simply just use the 2 timers (right and left side pull) to eliminate any nuisance trips under certain conditions.
The TAC (Time-Alarm-Controller) is connected from the output of the HSPD device. The TAC will cut out the UP direction of the hoist and cut out either the Left or Right Bridge or Trolley motion (as desired). It also has programmable timers to remove the possibility of nuisance trips Included are connections for Left or Right Side pull lights or alarms. TAC is recommended if more than the UP hoist motion need to be controlled or avoidance of nuisance trips (use of timers).